CODESYS HVAC Modbus SL - Article no. 2312000013
The HVAC Modbus Library can be perfectly complemented with the decentralized powerIO® system, which is based on working with communicative Modbus sensors and actuators. Serial stations are immediately converted to TCP and can be queried via a CODESYS controller. Further information about the decentralized system under http://www.powerio.com.

The HVAC Modbus SL library runs independently from the CODESYS Modbus library. There is no need to use a controller with CODESYS Modbus library.

Detailed Wiki on www.hvac-automation.com.In the HVAC Visu Library from the HVAC Building Automation Package SL there are Visu Frames matching the blocks.

CODESYS Control for Pigeon contains support for the Pigeon computers family (RB100, RB300, RB100-CM3, RB300-CM3, RB700). Pigeon computers are powered by Raspberry Pi Compute Module and Linux system. Pigeon is a series of computers for use in industrial control and automation systems. Pigeon computers have a rich set of inputs and outputs and a wide choice of interfaces (Ethernet, RS-232, RS-485, CAN, USB, 1-wire, HDMI). After installation of the CODESYS Control runtime system for Raspberry Pi and CODESYS Control for Pigeon, the Pigeon acts as a CODESYS controller, which can be engineered with the CODESYS Development System (V3).

Device drivers for the following I/O are included:

▪ Optoisolated Digital Inputs

▪ Dry Contact Inputs

▪ Digital Outputs

▪ Analog Inputs

▪ Analog Outputs