Home > Servo Drives >

Elmo: GOLD SOLO TRIPLE TWITTER Digital Servo Drive, G-SOLTWIT100/200ERSD
Elmo: Gold Solo Triple Twitter Digital Servo Drive, G-SOLTWIT100-200ERSD
 
Elmo

Continuous current 100A, Max DC operating voltage: 200 V, Communication: EtherCAT and USB, Operating temperature: 0° ~ 40° C (32° ~ 104° F)


Quantity in Stock:25

Availability: Usually Ships in 1 to 2 Weeks
Order #: G-SOLTWIT100-200ERSD
.

Description Ordering Information Specifications and Drawings
 

Gold Solo Triple Twitter Digital Servo Drive, G-SOLTWID180-60EETV
The Gold Solo Triple Twitter is Most Powerful Miniature Smart Servo Drive, over 16KW in 55 x 80 x 34.7 mm
This advanced, high power density servo drive provides top performance, advanced networking and built-in safety, as well as a fully featured motion controller and local intelligence. Power to the Gold Solo Triple Twitter is provided by a DC power source which is isolated from the Mains. The Gold Solo Triple Twitter can operate with single or dual power supplies. If separation between the main DC power source and a control supply is required, then a control supply (isolated from the Mains) is required according to the Part Number.
The Gold Solo Triple Twitter can operate as a stand-alone device or as part of a multi-axis system in a distributed configuration on a real-time network. The drive is easily set up and tuned using the Elmo Application Studio (EASII) software tools, and is fully programmable with the Elmo motion control languages.
The Gold Solo Triple Twitter is available in a variety of models. There are multiple power rating options, different communications options, a number of feedback options and different I/O configuration possibilities.
Gold Solo Triple Twitter Highlights:
· High power density, over 16,000 of “Qualitative” Watts
· Ultra high current – up to 270A/60V, 240A/80V, 210A/100V, 100A/200V
· Easy to connect, simple to configure
· Record-setting weight of only 210 grams (7.4 Oz)
· Ultra Small, Ultra Efficient
· Advanced networking by EtherCAT Or CANOpen
· Supports any feedback sensor in single, dual and gantry configurations
· Incorporates Proprietary “Fast and Soft Switching Technology” resulting in >99% efficiency yet negligible EMI

Electrical Specification

Feature

Units

T100/200

Minimum supply voltage

VDC

20

Nominal supply voltage

VDC

170

Maximum supply voltage

VDC

195

Maximum continuous
Electrical power output

KW

16.5

Efficiency at rated power
(at nominal conditions)

%

>99

Maximum output voltage

Up to 96% of DC bus vltg

Amplitude sinusoidal
continuous current

A

100

Sinusoidal continuous
RMS current limit (Ic)

A

70











Elmo ‘s Gold Twitter breaking all boundaries. Again !
Gantry Motion Controller - The Elmo Way!

Share your knowledge of this product. Be the first to write a review »