Home > Servo Drives >

Elmo Motion Control: Gold Bee Digital Servo Drive, G-BEER80-80SE
Elmo Motion Control: Gold Bee Digital Servo Drive, G-BEER80/80SE
 
Elmo

Max power O/P: 5KW, DC Continuous current: 80A, Max supply voltage:10 VDC,Communication: CAN & etherCAT, Operating temperature: 0° ~ 40° C (32° ~ 104° F),


Quantity in Stock:1

Availability: Usually Ships in 1 to 2 Weeks
Order #: G-BEER80-80SE
Qty:

Description Ordering Information Specifications and Drawings
 

Gold Bee Digital Servo Drive, G-BEER80/80SE

This advanced, high power density servo drive provides top performance, advanced networking and built-in safety, as well as a fully featured motion controller and local intelligence. Power to the Gold Bee is provided by a DC power source which is isolated from the Mains. The Gold Bee can operate with single or dual power supplies. If separation between the main DC power source and a control supply is required, then a control supply (isolated from the Mains) is required.
The Gold Bee can operate as a stand-alone device or as part of a multi-axis system in a distributed configuration on a real-time network. The drive is easily set up and tuned using the Elmo Application Studio (EASII) software tools, and is fully programmable with the Elmo motion control languages.
The Gold Bee is an advanced high power density servo drive, delivering up to 5.6 kW power in a 12.6 cm3 (0.769 in³) compact package (35 x 30 x 11.5 mm or 1.38″ x 1.18″ x 0.45″). The Gold Bee is designed to be mounted on a PCB by soldering its pins directly to the PCB.

Gold Bee Highlights:
· Ready for the extreme, -40 °C to +70 °C, Vibrations up to 14 GRMS
· High Power Density, over 5500 of “Qualitative” Watts
· Ultra High Current, 50 A at 100 VD
· Advanced Servo capabilities for Best results with any load
· Extremely High Bandwidth, Current Loop > 4.5 KHz
· Fast and accurate response time
· Wide current loop dynamic range of 2000:1 (Stable & Smooth at 0.025 A with a 50 A
Drive)
· Sample time as low as 50 μs, for current, velocity and position
· Smallest to comply and be certified with “Safe Torque Off” (STO), SIL3, Level E
· Durable to endure any environment
· Complies to severe Safety, EMC and Environmental STDS
Electrical Specifications

Feature

Units

R80/80

Minimum supply voltage

VDC

10

Nominal supply voltage

VDC

65

Maximum supply voltage

VDC

75

Maximum continuous power output

KW

5

Efficiency at rated power

%

>99

Maximum output voltage

VDC

Up to 96% of DC bus voltage

DC continuous current

A

80

Sinusoidal continuous
RMS current limit (Ic)

A

56.5






Gantry Motion Controller - The Elmo Way!

Share your knowledge of this product. Be the first to write a review »