Mitsubishi Servo Drive Unit-MDS-C1-V2-0505

MITSUBISHI MDS-C1-V2-0505 It is a 2 axis servo drive CNC MELDAS MITSUBISHI MDS-C1-V2-0505 type MDS-C1 mounted on machine-tools with CNC MELDAS and MITSUBISHI HA Series axis motor for a power of 0.5kW on 1 axis and 0.5kW on the other axis. MITSUBISHI MDS-C1-V2-0505 ready to replace your 2 axis servo drive MDS-C1-V2-0505 defective or in fault installed on your CNC production machine-tools. MITSUBISHI MDS-C1-V2-0505 servo drive using the following characteristics : Output : 3.4A / 3.4A (0.5kW / 0.5kW)

All our MITSUBISHI MDS-C1-V2-0505 drives are sold and tested on suitable test rigs. This 2 axis servo drive CNC Meldas MITSUBISHI MDS-C1-V2-0505 is accompanied with a functional warranty.

In order to secure reliability and life, design the temperature in the panel so that the ambient temperature of each unit is 55°C or less. If heat accumulates at the top of the unit, etc., install a fan so that the temperature in the panel remains constant.

For MITSUBISHI HC102/HC103 and HC203/HC352 AC Servo motors.

The MDS-C1-V1/V2 servo drive unit has a function to D/A output the various control data. The servo adjustment data required for setting the servo parameters to match the machine can be D/A output. Measure using a hi-coder, oscilloscope, etc.
With the MDS-C1-V1/V2 Series, control is possible with the standard servo (MDS-B-V1/V2) control mode and high-gain servo (MDS-B-V14/V24) control mode. When replacing an older model (MDS-B Series) with this series, the servo parameter settings are automatically recognized and the control mode is determined. Thus, the model can be changed from either a standard servo or high-gain servo without changing the servo parameters. When using the MDS-C1-V1/V2 unit and newly adjusting the machine, select the high-gain specifications. The high-gain specifications are set as the default.