Parker: Motion Controller PAC120

The Parker motion Controller PAC is a PLC basing on ARM with integrated CODESYS. This programmable motion controller combines machine logic, real-time motion control and visualization into a standard based, performance driven, fan-less and easily mountable din rail solution. The controller matches the PACIO modules, which can be attached directly to form a mechanically and electrically homogenous unit. In combination with these modules, it can take over complete machine control. Equipped with a native, real-time EtherCAT bus, a modular interface slot, standard Ethernet and USB ports plus a built-in SD-card slot and the supported fieldbus options Profinet Slave, EtherCAT or EtherNet/IP the controller can be easily integrated and is suitable for a wide range of applications. Programmed with CODESYS, efficient and powerful control systems can be designed based on IEC61131-3 and PLCopen motion standards. Offering the OPC UA server the controller is the perfect device for industry 4.0 communication. Our PAC motion controller is available in two different versions: PA120 and PAC340. PAC120 is suitable for many motion applications. For higher demands on performance and memory the PAC340 is available. With its four processor cores, it also supports the CODESYS multicore feature.

Common Features • Fan-less ARM processor technology • Ethernet and EtherCAT • Fieldbus options: EtherCAT, Profinet, EtherNet/IP, Modbus • OPC UA server • CODESYS V3.5 • CODESYS WebVisu • CODESYS SoftMotion • IEC61131-3 programming • PLCopen motion control • Web configuration tool • SD card slot and USB interface • Expandable with Parker PACIO modules • DIN rail mounted

Options:
PAC120-PWP01-3X-00-01: PAC120,PLC,VIS,PROFI,OPC-UA,
PAC120-PWE01-3X-00-01: PAC120,PLC,VIS,ENET,OPC-UA,
PAC120-MWP01-3X-00-01: PAC120,MOTION,VIS,PROFI,OPC-UA,
PAC120-MWE01-3X-00-01: PAC120,MOTION,VIS,ENET,OPC-UA