ROC 2000 series

Absolute angle measuring devices for separate shaft coupling

system accuracy ±5”
solid shaft ∅ 10 mm
Position values per revolution: 26 bits
Interfaces: EnDat 2.2 , Fanuc Serial Interface αi, Mitsubishi high speed interface High permissible speed The solid shaft of the ROC 2000 series angle encoders is connected to the shaft to be measured via a separate coupling. This means that speeds of up to 3000 rpm are possible, for example, with a purely serial interface . High accuracy The angle measuring devices are characterized by the high number of lines of 16,384 and a high signal quality. This enables a high resolution of 28 bits and thus a smooth operating behavior of the drive.

ROC 2390M ID:1110412-01


Absolute angle encoder (singleturn) with integral 
bearing for separate shaft coupling
System accuracy:        ± 5.0''
Data interface:         Mit03-4
Positions per           
revolution:             67108864
Power supply:           3.6 V ... 14 V
Shaft:                  Solid shaft, diameter 10 
                        mm, length 20 mm
Flange version:         Rectangular flange with 80
                        mm centering collar, 
                        aluminum
Protection rating:      IP64 (EN60529)
Cable length:           1.00 m
Cable type:             PUR Ø 6.0 mm
Electrical connection:  Coupling M12, male, 8-pin
Connecting direction:   Cable outlet for axial and
                        radial use
Pin configuration:      D532351