Home > Heidenhain > Angle Encoders > Angle encoders with integral bearing > ROC 7000 series >

Heidenhain:Angle Encoder ROC 7000 Series ROC 7310 ID:1110421-01

Price : $8,601.00

Availability: 12 weeks
Order #: 1110421-01

Qty:

Description

Ordering Information

ROC 7000 series

Absolute angle measuring devices for separate shaft coupling

system accuracy ±2”
solid shaft ∅ 14 mm
Position values per revolution: 28 bits
Interfaces: EnDat 2.2 , Fanuc Serial Interface αi, Mitsubishi high speed interface

High accuracy

The angle measuring devices are characterized by the high number of lines of 16,384 and a high signal quality. This enables a high resolution of 28 bits and thus a smooth operating behavior of the drive.

High speed & large mounting tolerance

The solid shaft of the ROC 7000 series angle encoders is connected to the shaft to be measured via a separate coupling. This allows axial tolerances of up to ±1 mm in conjunction with high speeds.

ROC 7310 ID:1110421-01

Absolute angle encoder (singleturn) with integral
bearing for separate shaft coupling
System accuracy: ± 2.0''
Data interface: EnDat22
Positions per           
revolution: 268435456
Power supply: 3.6 V ... 14 V
Shaft: Solid shaft, diameter 14
                        mm, length 20 mm, with
                        internal thread M6, depth
                        16 mm
Flange version: Flange with 170 mm outside
                        diameter and 140 mm
                        centering collar, aluminum
Protection rating: IP64 (EN60529)
Cable length: 1.00 m
Cable type: PUR Ø 6.0 mm
Electrical connection: Coupling M12, male, 8-pin
Connecting direction: Cable outlet for axial and
                        radial use
Pin configuration: D532351

Support Links

Downloads

product information

Brochure – Angle measuring instruments with self-bearing

Brochure – Cables and Connectors

Prospectus – Interfaces

Share your knowledge of this product. Be the first to write a review »

ROC 7000 series

Absolute angle measuring devices for separate shaft coupling

system accuracy ±2”
solid shaft ∅ 14 mm
Position values per revolution: 28 bits
Interfaces: EnDat 2.2 , Fanuc Serial Interface αi, Mitsubishi high speed interface

High accuracy

The angle measuring devices are characterized by the high number of lines of 16,384 and a high signal quality. This enables a high resolution of 28 bits and thus a smooth operating behavior of the drive.

High speed & large mounting tolerance

The solid shaft of the ROC 7000 series angle encoders is connected to the shaft to be measured via a separate coupling. This allows axial tolerances of up to ±1 mm in conjunction with high speeds.

Quick Links

About Us

Contact Us

ROC 7000 series

Absolute angle measuring devices for separate shaft coupling

system accuracy ±2”solid shaft ∅ 14 mmPosition values per revolution: 28 bitsInterfaces: EnDat 2.2 , Fanuc Serial Interface αi, Mitsubishi high speed interface

High accuracy

The angle measuring devices are characterized by the high number of lines of 16,384 and a high signal quality. This enables a high resolution of 28 bits and thus a smooth operating behavior of the drive.

High speed & large mounting tolerance

The solid shaft of the ROC 7000 series angle encoders is connected to the shaft to be measured via a separate coupling. This allows axial tolerances of up to ±1 mm in conjunction with high speeds.

system accuracy ±2”
solid shaft ∅ 14 mm
Position values per revolution: 28 bits
Interfaces: EnDat 2.2 , Fanuc Serial Interface αi, Mitsubishi high speed interface