Home > Heidenhain > Angle Encoders > Angle encoders with integral bearing > ROC 7000 series >

Heidenhain:Angle Encoder ROC 7000 Series ROC 7390F ID:1110422-01

Price : $8,838.00

Availability: 12 weeks
Order #: 1110422-01

Qty:

Description

Ordering Information

ROC 7000 series

Absolute angle measuring devices for separate shaft coupling

system accuracy ±2”
solid shaft ∅ 14 mm
Position values per revolution: 28 bits
Interfaces: EnDat 2.2 , Fanuc Serial Interface αi, Mitsubishi high speed interface

High accuracy

The angle measuring devices are characterized by the high number of lines of 16,384 and a high signal quality. This enables a high resolution of 28 bits and thus a smooth operating behavior of the drive.

High speed & large mounting tolerance

The solid shaft of the ROC 7000 series angle encoders is connected to the shaft to be measured via a separate coupling. This allows axial tolerances of up to ±1 mm in conjunction with high speeds.

ROC 7390F ID:1110422-01


Absolute angle encoder (singleturn) with integral 
bearing for separate shaft coupling
System accuracy:        ± 2.0''
Data interface:         Fanuc05
Positions per           
revolution:             268435456
Power supply:           3.6 V ... 14 V
Shaft:                  Solid shaft, diameter 14 
                        mm, length 20 mm, with 
                        internal thread M6, depth 
                        16 mm
Flange version:         Flange with 170 mm outside
                        diameter and 140 mm 
                        centering collar, aluminum
Protection rating:      IP64 (EN60529)
Cable length:           1.00 m
Cable type:             PUR Ø 6.0 mm
Electrical connection:  Coupling M12, male, 8-pin
Connecting direction:   Cable outlet for axial and
                        radial use
Pin configuration:      D532351

Support Links

Downloads

product information

Brochure – Angle measuring instruments with self-bearing

Brochure – Cables and Connectors

Prospectus – Interfaces

Share your knowledge of this product. Be the first to write a review »

ROC 7000 series

Absolute angle measuring devices for separate shaft coupling

system accuracy ±2”
solid shaft ∅ 14 mm
Position values per revolution: 28 bits
Interfaces: EnDat 2.2 , Fanuc Serial Interface αi, Mitsubishi high speed interface

High accuracy

The angle measuring devices are characterized by the high number of lines of 16,384 and a high signal quality. This enables a high resolution of 28 bits and thus a smooth operating behavior of the drive.

High speed & large mounting tolerance

The solid shaft of the ROC 7000 series angle encoders is connected to the shaft to be measured via a separate coupling. This allows axial tolerances of up to ±1 mm in conjunction with high speeds.

Quick Links

About Us

Contact Us

ROC 7000 series

Absolute angle measuring devices for separate shaft coupling

system accuracy ±2”solid shaft ∅ 14 mmPosition values per revolution: 28 bitsInterfaces: EnDat 2.2 , Fanuc Serial Interface αi, Mitsubishi high speed interface

High accuracy

The angle measuring devices are characterized by the high number of lines of 16,384 and a high signal quality. This enables a high resolution of 28 bits and thus a smooth operating behavior of the drive.

High speed & large mounting tolerance

The solid shaft of the ROC 7000 series angle encoders is connected to the shaft to be measured via a separate coupling. This allows axial tolerances of up to ±1 mm in conjunction with high speeds.

system accuracy ±2”
solid shaft ∅ 14 mm
Position values per revolution: 28 bits
Interfaces: EnDat 2.2 , Fanuc Serial Interface αi, Mitsubishi high speed interface