Black anodized aluminum housing for surface- or wall mounting

Dimensions: 200 x 100 x 28 mm (to outside of mounting flanges)

Safety class: IP 30

Max. operating temperature: +40 °C

Socket for external power supply

One terminal connector, male, 2-way for external power supply (10–26 VDC)

One USB connector, type B

Three D-Sub terminal strips, female, 9-pin for counter inputs

One D-Sub terminal strip, male, 9-pin for I/O signals

External power supply with 10 – 26 VDC, max. 500 mA

Power consumption for encoders with 5,2 V ±5%: max. 150 mA

USB-interface according specification 2.0

1 TTL input for encoder interference signal

Encoder power supply: 5.2 V; max. 0.15 A

3 RS422 (line driver) or analog inputs (1 Vpp) for encoder signals and reference mark(s)

Input frequency: Encoders with TTL signals: max. 4 MHz (⇒ slope time ≥ 62.5 ns)

max. 300 kHz at times 20 interpolation

max. 240 kHz at times 25 interpolation

max. 300 kHz at times 40 interpolation

max. 240 kHz at times 50 interpolation

max. 300 kHz at times 80 interpolation

max. 240 kHz at times 100 interpolation

max. 120 kHz at times 200 interpolation

max. 60 kHz at times 400 interpolation

Three inputs (3 – 30 V) that can be used for ref. pulse inhibit, counter load signal, synchronous or asynchronous latch signal or for special assignment.

Three outputs (TTL) to cascade several cards or for special assignment.

Two analog outputs (0 – 5 V ±0.1 V), 8 bits resolution, output resistance max. 5 mA