Search
Categories

  Home > Delta Tau >

Delta Tau: Stack Board (ACC-2P)
Delta Tau: Stack Board (ACC-2P)
 

Price : $1,737.00

Price with Selected Options: $1,737.00

Quantity in Stock:3

Order #: 300-603672-10X


Options:

Qty:  
Description
 

* In overseas warehouse, about 1 week lead time for this Model.


Delta Tau: Stack Board (ACC-2P)

ACC-2P

High-speed-communications/digital-I/O board (Requires at least one of Opt 1A, 1B, 2, or 3)

Part No.:300-603672-10x

OPT1A
Option 1A: USB Interface

480 Mbit/sec USB 2.0 interface

Part No.:31A-603672-OPT

Provides a 12 Mbit/sec USB interface allowing USB communications with the PMAC2A PC/104 motion controller.

OPT1B

100 Mbit/sec Ethernet interface & 480 Mbit/sec USB 2.0 interface

Part No.:31B-603672-OPT


OPT2
Option 2: DPRAM Circuitry
On-board 8K x 16 dual-ported RAM for USB, Ethernet or PC/104 port (OPT-2A on base board).

Part No.:302-603672-OPT

Provides an 8K x 16 dual-ported RAM for USB, Ethernet or PC/104 ports on board of the Acc-2P communications board. If using for USB or Ethernet communications, Acc-2P-Opt-1A or Acc-2P-Opt-1B must be ordered. If used for PC/104-bus communications, PMAC2A PC/104 Option-2A must be ordered. The key component installed with this option is U17.

OPT3
Option 3: I/O Ports

ACC-2P Option 3 provides the following ports

• Multiplexer Port: To be used with PMAC ACC-34x type boards.

• TTL I/O Port: this port provides 16 lines at 5 VDC levels.

• Handwheel port: this port provides 2 extra channels, each jumper selectable between encoder input or pulse output.

Part No.:303-603672-OPT

Provides the following ports on the Acc-2P communications board for digital I/O connections.

  • Multiplexer Port: this connector provides eight input lines and eight output lines at TTL levels. When using the PMAC Acc-34x type boards these lines allow multiplexing large numbers of inputs and outputs on the port. Up to 32 of the multiplexed I/O boards may be daisy-chained on the port, in any combination.

  • I/O Port: this port provides 16 general-purpose digital I/O lines at TTL levels and these can be configured as all inputs, all outputs or eight inputs and eight outputs.

  • Handwheel port: this port provides two extra channels, each jumper selectable between encoder input or pulse output.


Share your knowledge of this product. Be the first to write a review »