Wide range power supply voltage

Easy wiring

Power-supply voltage: Single-phase 100-220V ± 10% 50 / 60Hz

Power consumption: 500VA or less

Drive system: Star bipolar; constant-current system

Drive current: 0.75A/phase, 1.4A/phase (Current value switching)

Step angle: Full step (FULL) half- step (HALF)

Ambient temperature and humidity: 0 ~ + 40 ℃, No freezing or condensation, 80% or less

Storage temperature and humidity: -10 ~ + 60 ℃, No freezing or condensation, 80% or less

Operating Height : Less than 1,000m from sea level

Atmosphere: In the room without corrosive gas, inflammable gas or dust, without splashing water or oil.

Mass: 700g or less

External dimensions: 165 × 138 × 48mm

Target motor: PCE5641-AC(BC), PCE5661-AC(BC), PCE5691-AC(BC), PCE5961-AC(BC), PCE5991-AC(BC), PCE59131-AC(BC), PF564-AC(BC), PF566-AC(BC), PF569-AC(BC), PF596-AC(BC), PF599-AC(BC), PF5913-AC(BC)

1 pulse method (PULSE, CW / CCW), 2 pulse method (CW, CCW), the current off (CO)

Photo -coupler input resistance 220Ω

Input signal voltage L: 0-0.5V H: 4-5V

Excitation origin signal (MONI) overheat (HEAT)

Photo -coupler open collector output 25V 10mA or less

Pulse input method switch

Automatic current down (A.CD)

Automatic current off (A.CO)

Drive current off (CO)

Rage origin signal (MONI) output

Overheat (HEAT) signal output

Current setting switch

No abnormality detected after the application of the below voltage among each terminal for one minute in normal temperature and humidity

Power input and motor line - between the PE terminal

Power input and motor line - between the signal input and output terminals

In normal temperature and humidity , the values measured at DC500V are more than 100MΩ

Power input and motor line - between the PE terminal

Power input and motor line - between the signal input and output terminals