Encoder diagnostics: The encoder is connected directly to the test or inspection device. This makes a comprehensive analysis of encoder functions possible.

Diagnostics in the control loop: The PWM phase meter is looped into the closed control loop (e.g. through a suitable testing adapter). This makes a real-time diagnosis of the machine or system possible during operation. The functions depend on the interface.

Connection to the oscilloscope via BNC connectors

Measurement of signal amplitudes, current consumption, operating voltage and scanning frequency

Graphic display of incremental signals (amplitudes, phase angle and on-off ratio) and the length and width of the reference signal

Display of symbols for the reference mark, fault detection signal and counting direction

Universal counter (interpolation selectable from single to 1024-fold)

Adjustment aid (PWT mode) for exposed linear encoders

Convenient operation via soft keys and display on LCD monitor

Measurements can be conducted even during operation

Inputs: Expansion modules (interface boards) for 11 µAPP; 1 VPP; TTL; HTL; EnDat*/SSI*/commutation signals

Voltage supply: DC 10 V to 30 V, max. 15 W

Dimensions: 150 mm × 205 mm × 96 mm

Inputs are connected through to the subsequent electronics

BNC sockets for connection to an oscilloscope