Includes an automatic adjusting function for the signal (EZA function) at the push of a button.

Detector head mounting and signal adjustment possible without oscilloscope or PC.

A setup indicator for checking signal strength is included.

I/F circuit integrated in connector shell reduces volume to 60% compared to conventional interface.

Self-diagnosis function with USB connectivity facilitates signal strength checking and parameter setup.

Glass and metal tape scales are available.

The thickness of the detector head is only 7.5 mm. The metal tape scale type has a mounting surface area of 12.5 by 9.325 mm, allowing use in applications where a space-saving design is important.

Detection method: Reflective photoelectric linear encoder

Scale type: Glass, Metal tape

Main scale grating pitch: 20µm

Output signal:

Type B: 2-phase square wave signals, reference point pulse, external reset input.

Type C: 2-phase square wave signals, reference point pulse, 2-phase sinusoidal signals.

Effective range: 10 to 3000mm

Resolution: 0.05µm to 5 µm

Accuracy (20°C) Glass Scale Type:

Effective range 10 to 300mm: ±1µm

Effective range 350 to 500mm: ±2µm

Effective range 600 to 1000mm: ±3µm

Effective range 1100 to 3000mm: ±3µm/m

Accuracy (20°C) Metal Scale Type:

Effective range 10 to 1000mm: ±5µm

Effective range 1100 to 3000mm: ±5µm/m (The accuracy applies to individual scales. For double-end fixing designs, perform point-to-point correction after ensuring the metal tape is tensioned correctly.)

Maximum response speed: 2.6m/s (With sinusoidal signal amplitude of -3dB)

Scale reference point: 50mm pitch, 10 to 80mm: Center point

Power supply voltage: 5VDC±5%

Operating temperature/ humidity range: 0 to 40°C, RH 20 to 80% (no condensation)

Storage temperature/ humidity range: –20 to 60°C, RH 20 to 80% (no condensation)